Polypipe Pn10 L.s. Stb-flange 250mm buy online at trade prices  | blog | feedback | view cart | contact us | faq | home
MyTub - Plumbing, Parts and Spares, Drainage and Heating trade supply specialists
Shopping cart
You have no items
in your trolley.
SubTotal : £0.00

Contact MyTub for plumbing supplies 0844 556 1818


Plumbing Trade prices delivered to your door Upto 60% off RRP
Friday 20, April 2018
login / register
 
  Departments
Bathroom & Kitchen Bathroom & Kitchen Supplies
Heating System Supplies Heating System Supplies
Parts and Spares Parts and Spares Supplies
Drainage Above & Below Ground Drainage System Supplies
Industrial Plastics Concrete Products Industrial Plastics Concrete Products
Agru Pe Pipe Agru Pe Pipe
Chamber Sections Rings Gullies and Pipes Chamber Sections Rings Gullies and Pipes
Concrete Concrete
Cubis Preformed Plastic Chambers Cubis Preformed Plastic Chambers
Hayes Plastic Engineering Hayes Plastic Engineering
Oadby Plastics Natural Rod Oadby Plastics Natural Rod
Plasson Agrifit Plasson Agrifit
Polypipe Hppe Polypipe Hppe
Preformed Plastic Chambers Preformed Plastic Chambers
Tecno Plastic Inch Pvcu Fittings Tecno Plastic Inch Pvcu Fittings
Tecno Plastic Metric Pvcu Pipe Tecno Plastic Metric Pvcu Pipe
Air Conditioning & Refrigeration Supplies Air Conditioning & Refrigeration Supplies

  Manufactures
Manufactures Manufactures list

  Collections
collections Design collections
Home > > > > > >

Polypipe Pn10 L.s. Stb-flange 250mm


Polypipe Hppe -  Polypipe Pn10 L.s. Stb-flange 250mm

Polypipe product

44% 44 percent off rrp

Department: Polypipe Hppe
  Polypipe Pn10 L.s. Stb-flange 250mm
    • Sizes available are SDR 17 (10 bar) 32mm to 1200mm & SDR 11 (16 bar) 20mm to 630mm
• Operating temperature -40°C to +60°C subject to pressure requirement
• Comprehensive system includes full range of pipes and fittings
• Prefabrication service is available
• Fusion weld or mechanical installation
• Excellent impact resistance
• Excellent chemical resistance
  PN10 LONG SPIGOT STUB FLANGE 250MM

Terrain"s PE100 high density polyethylene pressure pipe system is a fast and reliable solution to the challenges
presented by the requirements of modern supply systems.
Utilising the benefits of polyethylene jointing technologies and excellent chemical resistance, Terrain"s PE100 pressure pipe system can be used across a wide range of applications including:
• Water supply and distribution
• Water treatment
• Cooling water
• Pressurised waste water systems
• Transportation of chemicals

Manufacture: Polypipe
Polypipe
Code#:
2012.10.250
MyTub Code#: 558895
PDF File: Download pdf brochure 2.58mb
 
rrp£476.51
save£211.45
price£265.06

inc vat£318.07

Free UK delivery
email for overseas delivery charges

Stock Check Polypipe Pn10 L.s. Stb-flange 250mm check stock here..
   
  Quantity
Share on facebook Share on Twitter Share on Google+ Share on Digg Share on StumbleUpon Share on Linkedin

Related Polypipe Hppe Products

Polypipe Pn10 6m Pipe Black 250mm
Related item Polypipe Pn10 6m Pipe Black 250mm
rrp£2694.83
our price£1499.00
Polypipe Pn16 L.s. End Cap 110mm
Related item Polypipe Pn16 L.s. End Cap 110mm
rrp£170.16
our price£94.65
Polypipe 40v Ef. Brch.saddle 110x32
Related item Polypipe 40v Ef. Brch.saddle 110x32
rrp£281.47
our price£156.57
Polypipe 40v Ef. Brch.saddle 125x32
Related item Polypipe 40v Ef. Brch.saddle 125x32
rrp£281.47
our price£156.57
Polypipe Pn10 Profile Gasket 200mm
Related item Polypipe Pn10 Profile Gasket 200mm
rrp£254.66
our price£141.65
Polypipe 40v Ef. Brch.saddle 110x50
Related item Polypipe 40v Ef. Brch.saddle 110x50
rrp£281.47
our price£156.57
Polypipe Pn10 6m Pipe Black 225mm
Related item Polypipe Pn10 6m Pipe Black 225mm
rrp£2210.58
our price£1229.63
Polypipe 40v Ef. Adjust.elbow 180mm
Related item Polypipe 40v Ef. Adjust.elbow 180mm
rrp£1790.72
our price£996.09

Polypipe Pn10 L.s. Stb-flange 250mm Delivered to your door

Shopping cart
Your Shopping Cart is Empty

Contract Pricing and Quantity Discounts available

  Recently viewed  
Polypipe Pn10 L.s. Stb-flange 250mm polypipe pn10 l.s. stb-flange 250mm
£265.06

Feedback
Great service, great prices, excellent delivery asap, no quibble, no problem , will definitely use My Tub again !
...Brian Welch
I am very disapointed by the service you offered to the extent I would postively recommend others not to use your company. To advertise products for sale, then not be able to deliver them till over 30 days after the order has been placed is not acceptable. To insist that when buying two products it is necessary to pay seperate postage on both seems unreasonable. When the issues were raised, the staff spoken to seemed very uninterested as it was my problem not theirs and they also did not appear to have read the messages sent to them. ------------- ------------------------- ------------- --------------- Dear Mark It is an unfortunate fact that no company in the UK today stocks every item they sell, we offer over 170,000 lines all at trade prices and sometimes less. Over 9
...Mark Bradley
Excellent service. Quite happy with the product. Delivered on the said delivered day without a delay
...Harsha Jayamanne
I am fairly happy with your service but wonder why you CONFIRMED DELIVERY as 26th September, but it did not arrive until the 27th Driver had papers with 26th crossed out & replaced with 27th BUT NOBODY LET ME KNOW! ------------- ----------------- Good afternoon, We are sorry about this. We had confirmed the original date with the delivering branch but the driver could not physically finish his round, hence delivery the following day. We were not informed about the delay. Regards MyTub
...Mr K. Chapman
I ordered this same item just two years ago thermo couple for gas fire ordered it the at 3pm arrived 9am next day, this time taken a few days longer but no emergency so pleased enough about service, the only criticism I made then and am making now still no PHOTO image of the item being purchased it really does make a difference when you can compare it item that you trying to match, luckily I still had the same part number, but would illuminate some problems. ------------- ---------------------------- Dear Henry We have uploaded a photo now, thanks for the feedback. Regards MyTub
...Henry P Robinson
Very pleased with the service of this company, as wed had difficulty sourcing the item locally. There was a slight delay in it arriving but I was kept informed of the situation all along, so it wasnt a concern. Emails were replied to promptly and the member of staff at the branch where I collected the item was pleasant and efficient.
...Mrs Janet Woodford
I was impressed and would recommend mytub. Mytub was easy to contact, I spoke to people on the telephone who knew what they were talking about and if uncertain would look into the matter and get back to me with reliable information. i could see the conversation history by using the contact us form. I was kept me up to date with my order process via emails. A company that deserves to do well.
...jane wilkinson
Nice taps, delivered as promised. A conservative delivery estimate which is achieved is much better than a shorter estimate not achieved - even if the former actually delivery lead time is longer than the latter i.e. if you say 5 days and it takes 7 days thats worse than saying 10 days and getting it in 10. Ideally of course you would reduce your estimated lead time 10 days to 5, or whatever and still achieve this shorter time. Regards GG
...Graham Griffiths
Re Delivery. On the order form I added that the part could be left in a safe place. Only to be told that it would have to be signed for. When I emailed on the day asking for an idea of a time, I was told that the delivery was on its way but that you didnt have the drivers itinerary and couldnt give any time. Eventually, late afternoon, the part arrived. If Id have known that you had a tie with parts centre I could have picked it up at a branch. All other companies I deal with deliver to a safe place nominated by me. I wont say I wouldnt use My Tub again, but I would think twice about it.
...James Brannigan - James Brannigan
excellent service. Part fitted and working , happy customer
...KOOLFORCE

Why choose MyTub Limited for polypipe pn10 l.s. stb-flange 250mm 2012.10.250?

  • Fast deliveries
  • Nationwide UK distribution delivery network
  • Local pickup if required
  • Professional Human Service
  • Pre sales tech advice
  • Second to none after sales service
  • This polypipe pn10 l.s. stb-flange 250mm 2012.10.250 is a genuine branded product
  • Worldwide export if required
  • Read what the experts, our customers have to say above.

Price Match Guaranteed

MyTub ltd Plumbing Supplies  
    Verified Credit Score by CheckRate
  VAT relief for disabled people MyTub is a member of the British Chambers of Commerce  
Major credit cards accepted
Verified by VISA  
MasterCard SecureCode
MyTub Ltd
61 Victoria Terrace
Whitley Bay
Tyne & Wear
NE26 2QN
Company No. 06352542
VAT number: 917634607
Copyright 2007 - 2018 © MyTub Ltd
Polypipe Drainage
Polypipe Pn10 L.s. Stb-flange 250mm