Albion Mainsflo Mf30/250 C/p Dir Combi L

Albion Mainsflow and Mercury Cylinders

Albion Mainsflo Mf30/250 C/p Dir Combi L

Mainsflow Contractor is a thermal store system heated from a gas, LPG
or oil fired boiler, suitable for use in both new build and existing property
refurbishment.
• Mains fed hot water throughout the home.
• No tanks in the loft.
• Flow rate more than double most combination boilers.
• Hot water temperature of 55degC.
• Mains pressure showering without a pump.
• Fills a bath in 3 minutes.

ALBION MAINSFLO MF30/250 C/P DIR COMBI L The Direct Mainsflow Contractor has one coil and is heated directly by the boiler. The stored water within the Mainsflow is primary water flowing throughout the boiler and radiator circuits.The store thermostat controls pump 1 and the boiler to heat the store. The boiler operates on maximum setting (choose a boiler with a flow minimum 80°C) and heats the store to 75°C. In turn the room thermostat will operate pump 2 and circulate hot water around the radiator circuit providing instant heat - a very useful benefit on cold winter mornings.

Mainsflow Direct units function in open vented primary systems. The feed and vent must be at the highest level in the system. They are not compatible with sealed primary systems.

Direct Mainsflow thermal store systems are designated Integrated Thermal Store.