Overview

The business
For more than forty years, the Bürener Maschinenfabrik GmbH (bmf) has been providing the industry with products and installations for delivery, filtering and conditioning techniques in addition to parts and plastic parts. The slogan “Technik mit Ideen” (know-how plus ideas) is the order of the day, the 250-strong firm is making increasingly more modern solutions.

The scenario
The machine tool trade requires house-saving solutions. On this foundation, bmf developed the concept of a new cooling lubricant processing installation: the idea is based on a high performance coil-kind vacuum filter straight while in the coolant tank (“soiled tank”). For the immersible pump that is additionally to be put in in the tank, the following load profile was ready: A very compact design, yet with enough performance to attract the cooling lubricant that has been contaminated with chippings and different particles which were worn off within the steel processing operation, via the filter by means of a vacuum. The pump must convey the clear cooling lubricant on to the machine device at the required pressure.

The answer
For the new filter set up, Grundfos, working along with bmf specialists, has developed a brand-new submersible pump model: the SPK two-23/23. So what is just-out about this mannequin?

· Essentially the most noticeable factor is the vacuum adapter for vacuum filtration; these vacuum adapters are actually accessible for all immersible pumps from Grundfos.
· The inlet strainer that’s common in pumps for cooling lubricants is not there as a result of these pumps are at all times placed after the filter and only take in clean medium.
· The pump hydraulics have been further improved: the immersible pumps do not simply draw very properly (as much as -0.4 bar unfavourable pressure is feasible), in addition they bring the clean cooling lubricant to a pressure of as much as 7.zero bar (SPK two-23/23), and a most of 20 bars is feasible (CRK, MTR collection).
· The optionally available Harting plug simplifies the electrical connection of the pump (no electrician required).

And, because of the particular filter expertise on this immersible pump, no pace regulation is required both: because of how they normally work (the filter floor becomes loaded over time, so that higher pace = greater pressure is consistently required), normal filter pumps are sometimes designed with pace regulation. Coil-sort vacuum filters from bmf don’t have any filtering gear and therefore, because of their design, don’t develop into fouled on this manner, so pace management for the filter pump can be distributed with.

The result
The dual perform of the pump has several advantages for the consumer: The purification tank, and the pump to go together with it, which can be often needed are now not required. This compact filter manufacture therefore needsless area, saves money and is it’s additionally extremely low-maintenance. bmf division head, Heinz Ahlke: “the compact installation has confirmed its practicality in a number of reference initiatives while in the machine tool industry. In future we will probably be using the cutting-edge coolant conditioning system throughout the board”.

It was also important that, as a global producer, Grundfos already had its own sales and service group with subsidiaries in additional than 50 countries: “the availability of spare parts is due to this fact en-sured on all of the important markets – our customers, who’re all internationally based mostly, admire that.”

Heinz Ahlke, Head of Division, Chip Conveyors and Filter Systems, Bürener Maschinenfabrik GmbH says:

“Grundfos is certainly in a really wonderful technical place on the subject of immersible pumps and might offer a comprehensive product range. However what is at least as important for me is the availability and competence of the sphere team.”

Grundfos provided

· Progressive answer
· Low-upkeep system
· Compact installation

Pumps used
· SPK 2-23/23 pumps

Kingspan Environmental boasts over 30 years experience in manufacturing plastic tanks for storage below the Titan Environmental brand.

Company Information

As market chief in rotationally moulded storage options, we offer efficient options to a wide range of industries attributable to our devoted high ranges of investment in research and development.

We’re committed to continuing research and growth while in the fabrication of plastics know-how, notably rotational moulding processes. Through investment, interactive dialogue with our prospects and a determination to explore brand-new alternatives, we remain a leading force in an evolving industry.

Sustainable building initiatives require environmentally sensitive options which don’t compromise on high quality and flexibility. In at the moment’s competitive market, Kingspan Environmental can and can proceed to provide the expertise and international standing for sustainable, reasonably priced solutions.

As a principal member of OFTEC, the regulatory body for the oil heating industry in the UK and Eire, and a member of the Federation of Petroleum Suppliers, we work in partnership and try for excellence in manufacture, installation and after care. We help to lift consciousness of rules to protect our surroundings and guarantee our products comply with OFTS T100 standard.

Developing Excellence

Environmental sustainability and energy efficiency is an space that has witnessed the impression of our rotational moulding expertise. We provide inexpensive and environmental solutions, by our experienced engineering and gross sales teams.

At a product stage, we use rotational moulding processes to construction containers similar to plastic tanks for harvesting rainwater, off-mains drainage methods and gasoline storage. At a developing stage, we’ve got taken measures to each run our manufacturing plants extra effectively and in addition minimise our affect on the atmosphere by installing energy saving technologies within our making facilities. By applying our experience to manufacture processes and generating energy from renewable sources, our vegetation in Portadown and Newry lower prices dramatically and considerably diminished our carbon footprint. Read extra about how we achieved this.
· We are dedicated to continual funding in rotational moulding analysis and development
· Our making sites can function 24 hours a day 7 days per week
· Our operations are ISO9001, ISO14001 and ISO18001 authorised
· We develop sturdy cooperative relationships that produce top quality options
· We have in-house Finite Aspect Evaluation, design and engineering assets

Our repute displays our dedication and reliability, while the broad scope of our operations ensures cutting-edge know-how and complicated technical support. Our merchandise are unrivalled in their energy, uniformity and flexibility.

Awards

A number of the notable merchandise have been awarded several OFTEC Awards for Excellence:

· OFTEC Awards for Excellence 2010: Modern Product of the 12 months for our cutting-edge Sensor SonicSignalman
· OFTEC Awards for Excellence 2009: Advertising Marketing campaign of the 12 months for “Who is watching your oil?” for our Sensor Watchman Alarm
· OFTEC Awards for Excellence 2008: Green Initiative of the Year for our BioMaster a hundred with TMS, biofuel storage and shelling out system with integrated tank administration

FAQ

Do I require a bunded or single-pores and skin oil tank?

In all instances an OFTEC threat assessment should be carried out by an appropriate qualified engineer with OFTEC registration. OFTEC are the regulatory physique for the oil industry.

If the following apply then a bunded oil tank is to be installed.

· Tank volume in excess of 2500 litres
· Tank within 10m of managed water
· Tank located the place a spillage might run into an open drain or to a unfastened fitting manhole cover
· Tank within 50m of a borehole or spring
· Tank over arduous floor or laborious-surfaced ground that would enable spillage run-off to succeed in controlled water
· Tank positioned able where the vent pipe outlet will not be visible from the fill level
· Tank supplying heating oil to a constructing apart from a single-family dwelling

The Quinn Traditional central heating radiator range comprises of the market leading Quinn Round Top, class leading energy efficient Quinn Compact and the high performance LST.

Our extensive range of panel radiators offers choice, quality, affordable radiators without compromise made to the high standards that you the customer have come to expect.

From concept to delivery Quinn Radiators continually strive to exceed your expectations. Made in the UK, all of our radiators including the Traditional range are manufactured to exacting British Standards BS EN ISO 9001: 2000 quality system accepted by BSI.

So it is no surprise that our central heating radiators come complete with a 10 year warranty.

Quinn Round Top Radiators

Quinn Radiators are please to introduce the new Quinn Round Top.

This new Round Top radiator exhibits the smooth rounded top, without any sharp vertical weld seams characteristic of our current model, combining a discreet modern appearance with high performance and classic good looks. The closely arranged water channels ensure a high yield and faster heating.

The Quinn Round Top is suited to any home and offers the customer choice in heat output and size to any application or project coupled with outstanding quality, efficiency and finish. It is stocked in-depth and available locally through a network of merchants.

· Paint advantages – Using RAL 9016 there is an improved longer lasting paint finish in a cleaner white
· Metric Sizing – 100mm sizing, easier for measuring up etc.
· Low Water Content – Makes for more efficient use
· Four Tappings – Increased installation opportunities
· Can be used as a 2 in 1 radiator
· Improved packaging to ensure safe delivery of product
· Double Panel+ also available in heights of 400mm, 500mm, 600mm & 700mm
· Tested to higher standards – working pressure of 8 bars
· Excellent availability and sales support

Quinn Compact Radiators

Quinn Compact radiators set new standards in design, high performance and class-leading efficiency. With its slim profile and refined styling based on a market-leading 25mm pitch, These advances mean that Quinn Compact Radiators can provide more heat at a faster rate using less water and less energy than other traditional radiators.

The Quinn Compact comes in a wide variety heights and lengths, with factory fitted grilles and side panels for a perfect robust finish and coated in RAL 9016. The Quinn Compact offers the customer choice in heat output and size to suit any application or project coupled with outstanding quality, efficiency and finish.

· Factory fitted grilles and side panels
· Low water content for rapid temperature response
· SC, DC and DP+ configurations
· Available in five heights 300 – 700mm
· Up to thirteen lengths 400 – 2000mm
· Outputs from 956 – 13065 BTU/hr
· Versatile TBOE connections
· Manufactured and tested to BS EN442
· Durable powder coated finish
· Full 10-year warranty
· Excellent availability and sales support

Quinn LST Radiators

The Quinn Low Surface Temperature (LST) radiator is the number one solution for those installations where there may be vulnerable people at risk of burning themselves or other locations where the maximum operating temperature must be controlled such as nurseries, schools, clinics and hospitals.

Manufactured from a strong single-piece cover making the Quinn LST quick and easy to install with no visible welds or joint to trap dust and forward-hinged cover allowing for trouble-free access to the emitter for internal cleaning and maintenance, but has a simple locking device to prevent unauthorised access.

· Designed to comply with NHS Safe Surface Temperature Guidelines, where max surface temperatures should not exceed 43 degrees
· Available in five heights 450 – 870mm
· Up to eleven lengths 500 – 2000mm
· Outputs from 1079 – 9765 BTU/hr
· Manufactured and tested to BS EN442
· Paint advantages – using RAL 9016 there is an improved longer lasting finish in a cleaner white as well as anti-bacterial benefits
· Optional base plinth available to hide pipework
· Improved packaging to ensure safe delivery of product
· Durable powder coated finish
· Full 10-year warranty
· Excellent availability and sales support

When Dongan Engine manufacture facilities have been established back in 1998-2002 the main producing tools was imported instantly from Japan or Europe. This included tools for the engine construction line, washing lines, and centralised filtration system. Accordingly, a lot of the pumps in the programs had been Grundfos pumps.

To meet the rising demand and to ensure the steadiness of their fabrication, Dongan Engine just lately decided to replace many of the components in a large range of their fabrication lines. Based on optimistic experiences with Grundfos pumps while in the methods, the business decided to decide on Grundfos again. To adjust to the local loyalty government policy, Dongan Engine determined to buy their Grundfos Industrial pumps from local suppliers slightly than straight from Grundfos China.
The Grundfos Answer

Though Dongan Engine didn’t buy pumps directly from the sales firm, Grundfos China nonetheless maintained a wonderful relationship with Dongan Engine and offered well timed service for the brand-new pumps in the manufacture lines.

The close relationship has founded a very marvelous brand impression at Dongan Engine. And Grundfos China’s constant focus on reliability and high quality adhere to the requirements of Dongan Engine, which is the basis of a long-term cooperation between the 2 companies.

And every time, Dongan Engine does renovation work or expands its construction strains, it is Grundfos China they call. Thus far, Grundfos China has changed greater than one hundred ten CR, CRN, MTR pumps in the manufacture and utility systems.
The Consequence

As we speak, Grundfos is the preferred pump model and Grundfos China, the preferred pump partner. Prime quality pumps and Grundfos after-sales service safe clean operation and peace of thoughts with Dongan Engine.

Grundfos China has already replaced a non-Grundfos high pressure screw pump with a Grundfos MTS pump in a excessive-pressure cooling machine. And many more non-Grundfos pumps in the centralised filtration, sewage liquid dealing with, and high-pressure cooling systems are about to be replaced. And Grundfos China and Dongan Engine are already negotiating a substitute plan.
“At the moment, greater than 60% of the pumps we use in our manufacturing unit are Grundfos pumps – primarily for cleaning the manufacture line. Grundfos’ high quality pumps offer reliability, which is very important to ensure the standard of our construction. And together with their spectacular after-sales service the cooperation is our assure for reliability and consistency in our engine fabrication.” Hao Li Hui, Assistant Manager, Dongan Automotive Engineering department

About Grundfos

Managing company sustainability and accountability at Grundfos is the act of producing folks the world over meet desired objectives and objectives. It comprises of a set of business principles corresponding to mission, vision and company worth, a clearly communicated set of policies and methods, and an organisation to execute our methods around the world.

Grundfos Ltd

Established in the UK in 1964 as the 2nd gross sales firm to be set-up exterior Denmark, Grundfos Pumps Ltd in the present day are a leader while in the provide of pumps and pump systems for home, commercial building services and course of business purposes, in addition to being a major provider to the water provide and therapy industries and a provider of packaged fire sets. With approx.. a hundred and fifty workers who’re all employed in supporting the sales and marketing perform and with a turnover of £115m (2010); the business is managed from Leighton Buzzard with regional gross sales workplaces positioned in Leigh, Birmingham, London and Livingston in Scotland. GB works carefully with different UK based mostly subsidiary firms, GBW (Grundfos Manufacturing based mostly in Sunderland) and GEE (Grundfos EuroPump who’re our nationwide service suppliers) and Grundfos Watermill (supplying shower pumps). Leighton Buzzard is the HQ for both the UK and WEREG Western European Region.

In Aggersund, Denmark, the native municipality decided it was time to update their forty 12 months outdated vacuum sewer system. Following investigation of brand-new and alternative methods, they chose to interchange the small well pits with Grundfos PUST prefabricated pumping stations totally built-in with monitoring and management using Grundfos Devoted Controls.

The vacuum based mostly system contained greater than 60 small pits, each amassing wastewater from three to 4 houses. The decision to install such a system in the 1970’s rested largely on the issues specific to wastewater assortment in Aggersund – a excessive water table and risk of flooding. Maintenance had turn out to be timeconsuming, expensive, and working conditions typically difficult.

As Operations Manager Lars Peter Jensen of the Løgstør Wastewater Treatment Plant explains, “Contemplating the social, environmental and price issues, it was clear to us that the time was proper to contemplate alternate options”.

In the direction of a contemporary wastewater system
At first, the town’s engineers leaned in the direction of a conventional gravity-based mostly system, and also thought of pressurised systems. Nevertheless, a visit to a neighbouring municipality to see a project involving quite a lot of pumping stations with a completely brand-new type of management system satisfied them of another possibility.

The Grundfos PUST prefabricated pumping station means the municipality could install a sturdy polyethylene pumping station with pumps, pipes and accessories delivered on web site and lowered onto a concrete basis, in lower than a day.

“Pumping stations that arrive on a lorry, able to be off-loaded and installed, together with the superstructure, concrete foundation and all different necessary tools couldn’t be easier for us, and is the perfect answer for a town like ours, with a excessive water table,” says Lars Peter Jensen.

The addition of Grundfos Dedicated Controls ensures full monitoring and control of all pumping stations, and in this case with an vital just-out addition to Dedicated Controls that basically captured the imagination.

Brand-new management system ensures integration
The management system which generated explicit curiosity in was the GPRS online system, which connects the person items via a central SCADA system. The system additionally monitors alarms from the Grundfos IO111 sensor and MP204 motor safety unit, which permits the end user to immediately monitor the pump performance and protects them from damage.

Having the sort of system can significantly reduce the entire cost of a system by offering real time suggestions, permitting for fast selections to be made regarding preventative maintenance. In particular, the installation wizard and person interaction ensure consumer satisfaction.

”The system is very consumer friendly and simple to navigate, which implies it is straightforward for the operators to make use of the entire functions. The person interface is fantastic and is as easy to make use of and intuitive as using a mobile phone,” explains Lars Peter Jensen. “I can’t consider a single scenario regarding the every day operation of the pumping stations that the control system hasn’t had covered.”

One of the first turnkey installations from Grundfos
Primarily based on the data from the consulting engineer, Grundfos calculated the pressurised pipes, pumps, and pit sizes for a total of 9 pumping stations. The two larger pumping stations had been every equipped with Grundfos SEV 80 6 kW pumps and the smaller seven pumping stations have SEG grinder pumps.

Aggersund is among the first prospects to obtain a complete turnkey solution from Grundfos. This was a standard system that included prefabricated tanks, pumps, valves, pipes, and spares, to which was extra Devoted Controls, GPRS communication and breaker panels. Flexibility is constructed into these standard systems, allowing Grundfos to adapt a system for particular requirements.

Contemplating the flood risk in the municipality’s coastal cities, Grundfos was capable of supply a wastewater system that met the requirements for a posh mission, to the satisfaction of the municipality.

“We have invested several million Euros in this venture, so we had to be completely certain that we used a contributor whom we may trust. We already knew Grundfos from an area flood safety undertaking, and we are very satisfied with the pumping stations that at the moment are installed,” concludes Lars Peter Jensen.

Quinn Radiator’s range of panel radiators includes their Quinn Round Top, Quinn Compact and Quinn LST radiators; this is additionally complimented by Towel and Design radiators giving unrivalled choice to the specifier and consumer.

At Quinn Radiators, everyone from the sales staff by means of to fabrication are totally dedicated to you to ensure that you just get the radiators you need – while you want them.

Quinn Radiators is a division of the Quinn Group. The Quinn Group is a multinational organisation with substantial pursuits in a range of diverse trade sectors together with cement production and the fabrication of related concrete products.

It’s a market leader in Ireland and the UK in the fabrication of container glass products for the drinks and food trade and is a significant contributor of building insulation products. It is usually a market chief on a European broad foundation in the provide of heating radiators and in the production of commercial and domestic plastics.

Quinn Radiators Working to Shield the Surroundings

Quinn Radiators is committed to protecting the environment. We contemplate the environmental affect of our products and actions while continuing to provide protected, quality merchandise that meets customer and consumer needs. Quinn Radiators are committed to the operation of all actions and processes in an environmentally sound and sustainable manner. This consists of addressing the environmental elements of our radiator making processes with the intention to cut back waste and promote recycling. With a view to obtain the mission of conservation and efficient use of natural assets, Quinn Radiators:·
· Frequently overview manufacturing processes and contemplate new technologies and modern procedures to scale back the usage of and defend energy, water and other resources, while on the similar time maintaining the utmost standards of product security and quality.
· This assurance to innovation in our new cutting-edge fabrication facility in Newport, Wales ensures minimal energy usage & low emissions. It additional permits Quinn Radiators to supply probably the most environment friendly radiator on the European market utilizing the lowest quantity of steel for warmth output. This in flip allows for optimum warmth transfer and therefore minimum warmth loss through the heating system.
· Work with local, nationwide and international legislators and regulators in addition to the trade, to comply with and assist create cheap and effective legal guidelines and laws aimed at defending the environment.
· Design packages and packaging systems to minimise the influence on the surroundings and waste streams. This will embrace considerations of minimising bundle materials and using less or various materials.
· Consider the utilisation of recycled materials in product design in addition to the recycleability of components on the finish of helpful life.
· Our fully automated construction facility ensures minimal waste, nevertheless, Quinn Radiators recycles 100% of any waste resulting from the fabrication process.
· We also have automated warehousing with all picking performed on web site and therefore no added site visitors movements to different places, producing less harm and subsequently waste.
· Educate employees, and prospects through actions that promote environmental duty e.g. carbon footprinting.

GAH is working with Persimmon Homes on their development at Sycamore Park between Mildenhall and Bury St Edmunds.

The site comprises 2, 3, 4 & 5 bedroom houses and 1 & 2 bedroom apartments. Persimmon demands the highest standards in every home they build so GAH are delighted with this opportunity to work with them.

The development is located in an off-gas area, so Persimmon was looking for alternative forms of heating that are efficient, economical and preferably environmentally friendly.

The site comprises three types of heating system; the GAH Electrastream boiler and Electrastream Solar boiler and Daikin air source heat pumps.

Electrastream Solar boilers are being installed in the 2, 3, 4 & 5 bedroom houses. The Electrastream Solar harnesses the sun%u2019s power to heat your hot water, providing electric back-up if required.

The GAH standard Electrastream boiler has been installed into the 1 & 2 bedroom apartments. This is a cost-effective solution for smaller dwellings using only water and electric economy tariff services.

We are installing Daikin air source heat pumps to the community housing homes. The running costs of heat pumps are significantly lower than conventional heating systems – up to 70% of heat can be generated for free using natural resources.

The GAH group of companies was formed in 1993 to provide world class solutions to the ever-changing demands of the heating, refrigerated transport and water control industries.

Built in Britain
Based in Suffolk our manufacturing facility is second to none and is a testament to our forward thinking, dedication and our commitment to develop and invest in new innovations and systems. Uniquely, we are proud to remain an independent manufacturing company, being both UK-based and UK-owned.

Transport Refrigeration
GAH refrigeration specialises in the design and manufacture of direct-drive transport refrigeration systems. Our systems carry temperature sensitive goods for chill, freeze and heat applications in single or multi-compartment suitably insulated vehicles. All our systems are designed and manufactured in-house using the latest equipment, including 3D CAD systems.

Maintenance support
Our systems are supported by a nationwide fleet of service and repair engineers, a 24-7 UK-based call centre and a range of maintenance options.

Heating & Renewable energy
GAH supplies and manufactures a range of heating and renewable energy solutions for domestic and commercial properties. The landscape of this industry is very different from when we started business in 1993, selling predominantly oil boilers, and the current GAH product range is a
reflection of this.

Fuelled by a desire to utilize renewable energy sources in our homes and businesses, the GAH range of products includes the Electrastream range of electric and solar electric boilers, air source heat pumps, ground source heat pumps, solar panels and rainwater harvesters.

Water control systems
Coldstream and Dualstream systems have developed the use of accumulator technology to increase the flow of water and balance the mains pressure to hot and cold supplies within your property.

Our latest innovation, Boosterstream, is a small booster to increase water pressure to a home.

Water Softeners
GAH Water Softeners offer a full range of compact, fully automatic water softeners which will descale your existing system, prevent new scale from forming and start saving you money from the moment it is installed.

Providing probably the most modern washroom options within the market, the Urinals e-brochure covers some of the existing as well as latest ranges, together with the ground-breaking Odourwise™ Waterless urinal designs – The Centaurus and Galerie Plan.

NEW Odourwise™ Waterless Know-how

Twyford Bathrooms’ Odourwise™ Waterless systems take urinal designs to an entire brand-new level. Simple to put in and use, this just-out expertise affords complete and hygienic options for decreasing water, odours and costs. Odourwise™ additionally helps achieve the third BREEAM credit.

HOW IT WORKS

Urine passes by means of the replaceable Odourwise™ Waterless system cartridge, where the malodour counteractant neutralises odours above the urinal bowl. In the meantime, the system’s valve acts as a physical barrier in opposition to odours re-getting into from the pipe work below. The friendly bacteria inside the cartridge break down the uric salts, preventing any build-up that may trigger blockages; because the system is waterless, it also helps keep away from the construct-up of lime scale. On average, the Odourwise™ Waterless methods are 4.5 instances extra hygienic than normal urinals.

NEW The Centaurus Urinal

The Centaurus is the primary hybrid urinal that’s actually waterless, combining maximum water financial savings with enhanced hygiene. The revolutionary Odourwise™ Waterless expertise requires neither chemical compounds nor electricity, protecting it eco-pleasant as well as economical. The urinal can be totally rimless, developing it simple to scrub (both inside and outside the bowl).

NEW Galerie Plan Urinal

Installed with the Odourwise™ Waterless system, the Galerie Plan urinal provides the identical value-efficient and eco-friendly advantages as The Centaurus. With its utterly closed sides, Galerie Plan is straightforward to care for and with no hid rim requires minimal maintenance.

Galerie Plan can also be accessible with the option of ordinary flushing and digital timed flush.

The Clifton Urinals range

Now has a Clifton Waterless urinal which comes with the Odourwise™ system, the prevailing Clifton urinal presents a compact, pod-formed design with deep bowl; it is superb for small public spaces. Standard flushing choice is also available.

About Twyford

Expertise and repair

With one hundred sixty years underneath our belts there’s an enormous quantity of expertise at Twyford Bathrooms.

Our in depth information of ceramic design and our understanding of what our prospects want and want, is second to none.

What Twyford Stands For

Products designed for each day life.

The bathroom is an essential element in every day life. For everyone, young and old, at house or at work – morning, afternoon and night. Twyford Bathrooms is about being there for life.

Built to last

All Twyford Bathrooms ceramic merchandise come with a 25 year guarantee *, which reflects our assurance to high quality and the high requirements we work to.

Twyford showering merchandise are designed and manufactured to the best standards. We are so confident of their high quality, reliability and efficiency that we offer a lifetime guarantee in opposition to producing faults with each Twyford enclosure, screen and tray.

It’s one of many causes we have such a first-class popularity and we purpose to maintain it that way.

Just-out ideas to make life better

From the smallest design detail to the introduction of ground breaking just-out water saving or set up know-how, we’re all the time looking for shiny ideas that may improve our products and make life easier and better for our prospects – and the environment.

Potterton gained the biggest single social housing challenge with GM Procurement Ltd who chose Potterton’s Promax System HE Plus A and Potterton Promax Combi HE Plus A boilers for 150,000 social housing properties while in the North West. Their decision was based mostly on reliability, efficiency and support.

At Potterton we pride ourselves on the reliability of our products. And now 900 residents of North Tyneside agree with us. In 2006, North Tyneside Council chose to place their trust in Potterton and installed between 30 and 35 Potterton Promax Combi HE Plus boilers per week. Proving their religion was well placed, just one installation required an additional engineer call out.

Reliability

Reliability is a key factor for 2 reasons. Shoppers who’ve our merchandise fitted in their homes should be able to profit from constant reasonably priced heat and secondly we want to remove the need for expensive and time consuming upkeep name-outs. Shoppers can all the time depend on Potterton.

Potterton Merchandise

As one of many heating trade’s leading innovators, Potterton has all of the solutions in relation to high efficiency heating. The Potterton Gold Combi HE A, as an example, boasts a 2 12 months components and labour guarantee, integral clock and a choice of flue programs for complete freedom of boiler siting.

Potterton’s Gasoline boilers

Potterton has a range of gas boilers that make our products ultimate for use in a number of applications. We’ve got both natural fuel and LPG variants. The range contains the Potterton Gold Combi 24 HE, awarded a Greatest Buy by Which? magazine from 2006 – 2010.

Potterton’s range of Combi boilers consists of our flagship product, the Potterton Gold Combi HE A, with its 2 yr guarantee, in addition to the Potterton Promax Combi HE Plus A and the Potterton Performa Combi HE.

Potterton Heatmax Combi HE

A range of excessive-effectivity combi boilers that are quick and easy to put in in. The Potterton Heatmax Combi HE is availlable in 24kW, 28kW and 33kW outputs. As flexible as they’re dependable, every model presents built-in frost safety and comes with a two year parts and labour warranty*.

The Potterton Heatmax Combi HE has been built on tried and tested expertise and is manufactuered in the UK.

It is also environmentally pleasant with a SEDBUK Band A rating and has been permitted by the Vitality Saving Trust.

The boiler additionally has the backup from heateam who are available 7 days every week, 363 days a year. With full nationwide coverage provided by over 250 engineers.

Outputs
Heatmax Combi 24kW, Heatmax Combi 28kW and Heatmax Combi 33kW wall-mounted fashions

Key features and benefits
· Totally modulating outputs from 6.eight kW to 33 kW appropriate for a wide range of installations
· Provided complete with wall-mounting jig for easy set up
· Constructed-in two stage frost protection prolongs equipment lifespan and saves time throughout set up
· Comprehensive range of fluing options for straightforward siting
· Elective area frame package available to allow routing of pipes behind the boiler
· Compatible with the Potterton Single Channel Wi-fi Programmable Room Thermostat
· Filling loop equipped as commonplace
*Topic to registration and annual service

To take care of this excellence, our R&D and engineers are always innovating excessive-tech merchandise that conform rigidly to environmental and technological standards. With our personal making unit and main sources devoted to research and improvement, the SFA Group is a world participant, with subsidiaries and distributors that offer a whole line of grinders and pumps designed for the house, multi household housing, and boats.

The business has also marketed water remedy plant tools since our inception. Our technological expertise in these merchandise and our data of the bathroom fixture market has allowed us to widen our range of merchandise and successfully get in the bath remedy and shower market.

Our partners share our values of innovation, industrial effectivity, and customer support as they commit themselves per day to spreading our one widespread ambition: offering the hundreds of thousands of SFA clients worldwide the identical high quality of service yesterday, in the present day, and tomorrow.

Group SFA Background

1958: SFA started as a designer of water remedy plant gear and soon revolutionized the bathroom fixture market with its creation of a rest room grinder. Right this moment, our product, the Sanibroyeur SFA, allows homeowners to put in bathrooms, bathrooms, kitchens, or laundry rooms anyplace within the house, and with none major work. After establishing itself in France, SFA unfold its success story throughout Europe and North America. At the similar time, SFA set itself apart from different gamers while in the industrial subject by launching its first televised ad campaigns.

1990-2000: SFA becomes one of the first industrial firms in France to begin a top quality certification process. Its construction amenities are among the first ISO-licensed factories. The SFA Group diversifies its actions whereas still remaining targeted on the bathroom fixtures sector.

2008: The SFA Group celebrates 50 years of innovation

Product particulars for SANIFLO and SANIWALL

SANIFLO

The Saniflo macerator pump unit fits unobtrusively behind the WC.
You may select any make or colour of WC suite (BS EN 33 or 37 Horizontal Outlet) you wish to suit your ornamental scheme. When the WC is flushed the unit automatically prompts to pump waste horizontally to a distant soil pipe up to 50 metres away. Saniflo may also discharge vertically as much as four metres maximum, or a lesser mixture of vertical and horizontal pipe run.

SANIWALL

Saniwall is a built-in body system designed to accommodate all sorts of suspended WC (not equipped). Saniwall has a dual flush and an integral macerator pump.
To be used the place gravity fed plumbing is troublesome or inconceivable to install, Saniwall permits the installation of an entire shower room. Along with taking the waste and water from a WC there are three additional entry factors, one excessive and two low, enabling wash basin, bidet and shower to drain to the macerator which then pumps waste up to 5m vertically, 100mhorizontally or a lesser combination of both.